Wire-to-Board IDC connectors in two pitches

601 602 W-t-B IDC connector basic grids 2.54mm and 3.96mm straight and right-angled version

With the W-t-B IDC series 601 and 602, W+P presents the option of additionally processing larger cable cross-sections. This facilitates faster line connection. The connectors themselves can be installed in the field with ease using a hand tool.

The IDC area of the series 601 is designed for a cable cross-section of AWG 28 – 22, with a pitch of 2.54mm. The cable cross-section of the series 602 is configured for AWG 24 – 18, with a pitch of 3.96mm.

The female headers of both series can be supplied as pass-through or end options, with or without coding (601 only). With regards to the pin headers, it is possible to choose between a straight and right-angled version, which is offered with an additional latching option. Protective caps can also be procured to ensure a safe connection and a strain relief (female headers). Data sheets provide clear and detailed information regarding the individual alternatives available to order. In this way, W+P is offering a versatile system that can replace established products already on the market.

With a copper alloy as contact material, the series differ in terms of current rating and voltage rating: 3 A and 250 V AC with the series 601, 5 A and 600 V AC with the series 602. The number of contacts ranges from 02 – 16 (series 601) and 02 – 20 (series 602), with the exception of the pin headers of the series 601, which can be procured right up to a 40-pin version.

The insulator material consists of thermoplastic in accordance with UL94 V-2 and UL94 V-0. Safe functionality is guaranteed within a temperature range of -25° C to +85° C, processing takes place through wave soldering.

Free samples and data sheets can also be supplied. An ideal application field is the production of power supply lines.

To the series 601 and series 602